SELECTION TABLE

Maximum Rating Modul Number
KVmAkW
320006LITEC 0032k0
3400012LITEC 0034K0
3800024LITEC 0038k0
512006LITEC 0051k2
5240012LITEC 0052k4
5480024

LITEC 0034k8

LITEC

LITEC 3-5kV / 6-24kW

 

·       COMPACT DESIGN

·       CONSTANT VOLTAGE / POWER OPERATION WITH AUTOMATIC CROSSOVER

·       WIDE OUTPUT POWER OPERATING RANGE

·       EXTREM LOW ARC ENERGY

·       OEM CUSTOMIZATION AVAILABLE

The water-cooled switch mode power supplies LITEC are available with output voltages of 3kV and 5kV. The LITEC power supply series provides 6kW or 12kW and is specially designed for applications which need extreme low arc energy and the full output power over a wide range. Parallel operation to increase power and current capabilities are available as option.

SPECIFICATION

Input400Vac ±10%, 50 or 60Hz, three phase
OutputModels with output voltages of 3kV or 5kV and with two different output powers of 6 or 12kW are available. To increase power capabilities parallel operation for the 12kW model is available as option. Each model is available with either positive, negative, or reversible polarity referring to earth.
Analogue I/O-interfaceVoltage and power are continuously adjustable over 0 –10 V analogue inputs. The actual value is issued at the analogue interface with 0 –10 V.
Digitale E/A-SchnittstelleVoltage and power are continuously adjustable over 0 –10 V analogue inputs. The actual value is issued at the analogue interface with 0 –10 V.
Digital I/O-interfaceOver the digital interface the power supply can be released as well as device-specific and process-specific messages are issued
Voltage RegulationLoad: 0,01% of full voltage for full load change.
Line: ± 0,01% of full voltage over specified input range
Current RegulationLoad: 0,1% of full current for any voltage change.
Line: :
± 0,1% of full current over specified input range.
Residual ripple 50% rms. related to nominal voltage smaller ripples are possible depending on arc-energy.
Power connectionsAC Input connector       3-pin Han modular
HV output connector     HV power connectors with
                                     10m shielded HV cable.

CE Mark

EN55011/03.91 (limit value class A)
EN50082-2/03.95

Dimension

(H x W x D)

4U x 19” x 650mm, 6kV / 12kW.
8U x 19” x 650mm, 24kW
TYPICAL APPLICATIONS

Anode layer systems

Capacitor charging

High-Voltage plasma

OPTIONS

RSR232

Patented arc-current limitation
Current regulation
Manual programming on front panel

 

Questions?