HV-System solutions >40kW bis 120kW

 

CAPTEC

GLOWTEC

VAPTEC

The primary switched high voltage power supply of the type series CAPTEC, GLOWTEC und VAPTEC could be work in parallel mode to increase the output power. In parallel mode the output power could be increased up to 80kW. Output voltages from 2kV, 3kV, 5kV, 8kV, 10kV till 80kW are available and 15kV, 20kV, 25kV, 30kV till 40kW. To increase the power the 10kW-modules will operate in parallel mode and will be installed in 19“-switch cabinets completely wired.
By the use of the application specific 10kW modules of the type series CAPTEC, GLOWTEC or VAPTEC in parallel operation there are high power high voltage power supplies available which are suitable for your special application.
The devices come with a digital regulation as well as a RS232-Interface. With this RS232-Interface the set points for the output values could be given and read out. Further more the device could be enabled / disabled, failure messages could be read out and advanced arc management setting could be done. The RS232-Interface could be work in two operation methods, the terminal-mode and the SPS-mode.
At the terminal-mode characters could be interpreted on the control side with a terminal program, e.g. as the hyper terminal from windows. At the terminal program you could see a operation interface with which you could give settings to the power supply and also get information from the power supply.

At the SPS-mode a specific count of bytes will be send over the interface, which will be interpreted e.g. from a SPS.
To control the power supply you have to send a specific byte sequence with predefined contents to the power supply.
All options
(such as patented Arc-current limitation, field bus, special voltages, and much more) which are available for the single modules are also available for the high power series.

SPECIFICATION

Input400Vac ±10%, 50 or 60Hz, three phase
OutputOutput voltages from 2kV till 60kV with positive or negative output are available.
Optional output voltages up to 10kV are with floating output available.
Power connectionAC Input           terminal connector
HV Output        HV-plug with 10m cable
Analogue I/O-InterfaceVoltage and current are continuously adjustable over 0 – 10V analogue inputs. The actual values are issued at the analogue interface with 0 – 10V.
Digital I/O-InterfaceOver the digital interface the power supply can be released as well as device-specific and process specific messages are issued.
RS232-InterfaceWith this interface the set points for the output values could be given and read out. Further more the device could be enabled / disabled, failure messages could be read out and advanced arc management setting could be done.
Voltage RegulationLoad: 0,01% of full voltage for full load change.
Line: ± 0,01% of full voltage over specified input range.
Current RegulationLoad: 0,1% of full current for any voltage change
Line:
± 0,1% of full current over specified input range.
Residual ripple 1% eff. related to nominal voltage
Patented ARC-Limitation (Option)Limits the output current peaks to five times of the rated current.
ARC-Counter (Option)With the arc-counter a flash-over can be detected and counted.

Dimensions

(H x W x D)

please see selection table

CE Mark EN55011/03.91 (limit value class A)
EN50082-2/03.95

SELECTION TABLE

Modul

Number

Maximum

Rating

Dimensions

kV

DC

AkW

wide 

][mm]

high

[mm]

deep

[mm]

NHCG 0036k6

36,620

 

 

 

 

600

 

1600

33HE

 

 

 

 

800

NHCG 00310k

31030

NHCG 00313k

313,340

NHCG 00316k

316,650

 

 

2000

42HE

NHCG 00320k

32060

NHCG 00323k

323,370

NHCG 00326k

326,680

NHCG 0102k0

10220

 

 

 

 

600

 

1600

 

 

 

 

800

NHCG 0103k0

10330

NHCG 0104k0

10440

NHCG 0105k0

10550

 

 

2000

NHCG 0106k0

10660

NHCG 0107k0

10770

NHCG 0108k0

10880

NHCG 0201k0

20120

 

600

1600

 

800

NHCG 0201k5

201,5302000

NHCG 0202k0

20240

NHCG 030600 

300,6206001600800

NHCG 0301k0

301302000

NHCG 0301k3

301,340
NHCG 040750400,75306001600800
NHCG 0401k1401,125452000
NHCG 0401k5401,560
NHCG 060500600,5306001600800
NHCG 060750600,75452000
NHCG 0601k060160
Questions?