AKKUTEC 1208

Type:
AKKUTEC 1208-0 USB
Art.-No.:
NBPA0616G01006

Short Description

The battery buffered DC power supply of the series AKKUTEC is working according the stand-by parallel mode and ensures in connection with a lead-acid accumulator a safe continuous DC power supply in case of mains failure. The back-up time is depending from the state of charge of the accumulator and of the discharge current.

The power supply has the following features:

  • Battery charger with I/U-charging characteristics

  • Battery management by micro-controller

  • Battery voltage tracking of the charging voltage by external sensor module (optional)

  • USB interface: with corresponding drivers and Schneider TECControl Software the message contacts can be controlled and a Shut-Down/Restart can be made.

Request infos about this product

Product request

Start your request for this product!
captcha

Technical Data

Nominal input voltage

115 ... 230 V AC

Nominal frequency

47 ... 63 Hz

Max. nominal input current

0,84 A @ 115 V AC / 
0,42 A @ 230V AC

Max. charging current

8 A

Nominal output voltage

12 V DC

Output voltage range (with temp.-sensor)

9,9 ... 13,6 V DC

Output voltage range (without temp.-sensor)

9,9 ... 13,4 V DC

Max. nominal output current

8 A DC  

Chrage end voltage with temp.-sensor @ 25

16,6 V @ 25 °C

Charge end voltage without temp.-sensor

13,4 V DC ± 0,4%

Efficiency

88 %

Battery type

Pb-Akku, maintenance-free

Buffer time

Depending on Akku

Degree of protection

IP20

Operating temperature

0 ... 45°C

Storage temperature

0 ... 50 °C

Relative humidity

95 % non-condensing

Max. altitude (without derating)

2000 m above sealevel

Dimensions (H x W x D)

160 mm x 75 mm x 150mm

Weight

1 kg

Norms and Regulations

EN 50178 / EN 60950

UL approvals

No

For more details see datasheet.

Downloads

Description

Version

File Format

Manual

160727

PDF

To download the manual please log in here

Questions?